Operation CHARM: Car repair manuals for everyone.

Compressor Mounting Bracket Replacement

COMPRESSOR MOUNTING BRACKET REPLACEMENT

Removal Procedure





1. Remove the compressor.
2. Remove the compressor drive belt tensioner from the compressor mounting bracket.
3 Remove the compressor drive belt idler pulley from the compressor mounting bracket





4. Remove the compressor bracket mounting bolts.
5. Remove the compressor bracket.

Installation Procedure





1. Install the compressor mounting bracket to the engine block.

NOTICE: Refer to Fastener Notice in Service Precautions.

2. Install the compressor bracket mounting bolts.

Tighten
Tighten the bolt to 50 N.m (37 Ib ft).






3. Install the compressor drive belt idler pulley to the compressor mounting bracket.

Tighten
Tighten the compressor drive belt idler pulley to 50 N.m (37 Ib ft).


4. Install the compressor drive belt tensioner to the compressor mounting bracket.

Tighten
Tighten the compressor drive belt tensioner to 25 N.m (18 Ib ft).


5. Install the compressor.