Instrument Panel (IP) - Outer Trim Cover Replacement

Instrument Panel (I/P) Outer Trim Cover Replacement

Removal Procedure





1. Remove the 3 screws (1) attaching the instrument panel outer cover (2) to the instrument panel.
2. Remove the instrument panel outer cover (2) by rotating outward to disengage the ventilation ducts.



Installation Procedure





1. Install the instrument panel outer cover (2) to the instrument panel.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the 3 screws (1) attaching the instrument panel outer cover (2) to the instrument panel.

Tighten the screws to 2 N.m (18 lb in).