Horn: Service and Repair

Horn Replacement







Removal Procedure

Caution: Refer to Vehicle Lifting Caution in Cautions and Notices.
Vehicle Lifting Caution


1. Raise and support vehicle.
2. Remove the front fascia.
3. Disconnect the horn electrical connector (1).
4. Remove the horn assembly retaining nuts (2).
5. Remove the horn from the vehicle.







Installation Procedure
1. Position the horn to the horn mounting bracket.

Notice: Refer to Fastener Notice in Cautions and Notices.
Fastener Notice

2. Install the horn assembly retaining nuts (2).

Tighten the horn retaining nut to 25 N.m (18 lb ft).

3. Connect the horn electrical connector (1).
4. Install the front fascia.
5. Lower the vehicle.