Turn Signals: Service and Repair
Multifunction, Turn Signal Switch ReplacementRemoval Procedure
1. Remove the lighting fusible link from the engine compartment fuse block.
2. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement.
3. Press the 2 tabs (6) that retain the turn signal switch to the column.
4. Remove the turn signal switch from the column.
5. Disconnect the cruise control switch connector (2).
6. Disconnect the turn signal switch connector (1).
Installation Procedure
1. Connect the turn signal switch connector (1).
2. Connect the cruise control switch connector (2).
3. Install the turn signal switch to the steering column.
4. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement.
5. Install the lighting fusible link to the engine compartment fuse block.