Wiring Harness Replacement - Door

Wiring Harness Replacement - Door







Removal Procedure

Caution: Refer to Battery Disconnect Caution in Cautions and Notices.
Battery Disconnect Caution

1. Disconnect the battery negative cable.
2. Remove the water deflector.
3. Disconnect the following electrical connectors as necessary:
- The power mirror connector (3)
- The power mirror switch connector (2), if equipped
- The door lock switch connector (1), it equipped
- The power door lock actuator connector (7)
- The power window motor connector (6)
- The door-body wiring harness connectors (4)
- The speaker connector (5)

4. Remove the wiring retainers.
5. Remove the door wiring harness from the vehicle.








Installation Procedure
1. Install the wiring harness to the vehicle.
2. Install the wiring harness retainers.
3. Connect the following electrical connections as necessary:
- The power mirror connector (3)
- The power mirror switch connector (2). if equipped
- The door lock switch connector (1), if equipped
- The power door lock actuator connector (7)
- The power window motor connector (6)
- The door-body wiring harness connectors (4)
- The speaker connector (5)

4. Install the water deflector.
5. Connect the battery negative cable.