Generator Bracket Replacement
GENERATOR BRACKET REPLACEMENTRemoval Procedure
1. Remove the accessory drive belt idler pulley.
2. Remove the generator.
3. Remove the front generator bracket bolt and front bracket.
4. Remove the generator rear mounting bolt to the engine (2).
5. Remove the generator rear bracket.
Installation Procedure
NOTICE: Refer to Fastener Notice in Service Precautions.
1. Install the generator rear bracket and bolt (2) to the engine.
Tighten
Tighten the generator rear mounting bolt to the engine (2) to 50 N.m (37 Ib ft).
2. Install the generator front bracket and bolt to the engine.
Tighten
Tighten the generator bracket bolt to 50 N.m (37 Ib ft).
3. Install the generator.
4. Install the accessory drive belt idler pulley.