Wiper Switch: Service and Repair

Wipers/Washer Switch Replacement







Removal Procedure
1. Remove the steering column trim covers.
2. Disconnect the wiper control switch harness connector (1) by depressing the harness retaining tab and pulling the connectors apart.







3. Press the 2 tabs (1) that retain the wiper control switch (2) to the column (3).







4. Lift up the wiring harness connector retaining tabs on each side of the wiper control switch and pull the connector (1) from the switch.
5. Remove the wiper switch assembly.








Installation Procedure
1. Connect the wiper control switch connector (1).







2. Install the wiper switch (2) to the column (3) making sure the retaining tabs (1) are engaged.







3. Connect the wiper control switch harness connector (1).
4. Install the steering column trim covers.