Instrument Panel Cluster (IPC) - Trim Plate Bezel Replacement

Instrument Panel Cluster Trim Plate Bezel Replacement (Pontiac)

Removal Procedure




1. Remove the upper trim cover from the steering column.
2. Remove the lower screws from the instrument panel (I/P) cluster trim plate.




3. Remove the upper screws (1) from the I/P cluster trim plate.
4. Remove the I/P cluster trim plate.

Installation Procedure




1. Position the trim plate tabs to the retainers on the I/P cluster.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the upper screws (1) to the I/P cluster trim plate.

Tighten the screws to 2 N.m (18 lb in).




3. Install the lower screws to the I/P cluster trim plate.

Tighten the screws to 2 N.m (18 lb in).

4. Install the upper trim cover to the steering column.