Panel Replacement - Rear Compartment Closeout
PANEL REPLACEMENT - REAR COMPARTMENT CLOSEOUTTOOLS REQUIRED
J 38778 Door Trim Pad Clip Remover
REMOVAL PROCEDURE
1. Remove the seat cushion.
2. Remove the stationary seat back, if equipped.
3. Remove the split folding seat back, if equipped.
4. Using J 38778 remove the push-in retainers (2).
5. Remove the shelf trim panel (1).
INSTALLATION PROCEDURE
1. Position the shelf trim panel (1) over the rear shelf.
2. Install the push-in retainers (2).
3. Install the split folding seat back, if equipped.
4. Install the stationary seat back, if equipped.
5. Install the seat cushion.