Fog/Driving Lamp Switch: Service and Repair

FOG LAMP SWITCH REPLACEMENT - FRONT

REMOVAL PROCEDURE




1. Place the ignition switch in the OFF position.
2. Remove the instrument panel (IP) switch trim plate from the instrument panel (IP) using a small flat-bladed tool.




3. Disconnect the electrical connectors.




4. Disengage the retaining tabs. Remove the fog lamp switch.

INSTALLATION PROCEDURE




1. Install the fog lamp switch to the trim plate by pressing into place until fully seated.




2. Connect the electrical connectors to the switches.




3. Install the IP switch trim plate to the IP opening. Press the trim plate into place until fully seated.