Operation CHARM: Car repair manuals for everyone.

Power Window Switch Replacement - Rear Door

POWER WINDOW SWITCH REPLACEMENT - REAR DOOR

REMOVAL PROCEDURE




1. With a flat-bladed tool push in and lift up to release the front retaining clip for the accessory switch plate (1).
2. Remove the accessory switch plate (1) from the door trim panel
3. Disconnect the electrical connector (2) from the power window switch (3).
4. Release the power window switch retaining tabs.
5. Remove the power window switch (3) from the accessory switch plate (1).

INSTALLATION PROCEDURE




1. Install the power window switch (3) to the accessory switch plate (1).
2. Press the power window switch (3) into the accessory switch plate (1) until retaining tabs are engaged.
3. Connect the electrical connector (2) to the power window switch (3).
4. Install the accessory switch plate (1) to the door trim panel.
Press the accessory switch plate (1) into the door trim panel until retaining clips are engaged.