Quarter Window Glass: Service and Repair

Quarter Window Replacement

Tools Required

J 39032 Stationary Glass Removal Tool

Removal Procedure






Caution: Refer to Glass and Sheet Metal Handling Caution in Service Precautions.

Important: Before cutting out a stationary window, apply a double layer of masking tape around the perimeter of the painted surfaces and inner trim.

1. Remove the rear quarter trim.






Caution: Refer to Glass and Sheet Metal Handling Caution in Service Precautions.

Important: Keep the cutting edge of the tool against the window. Do this from inside the vehicle in order to protect the outer painted surface.

2. This will allow the urethane adhesive to be separated from the window.

* Leave a base of urethane on the pinchweld flange.
* The only suitable lubrication is clear water.
* Use J 39032 or equivalent in order to remove the window.
* Remove the quarter modular window from the pinchweld flange.

Installation Procedure

1. Install the quarter window into the opening.
2. Install the rear quarter trim.
3. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.