Sunroof / Moonroof Module: Service and Repair

SUNROOF CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the headliner.
2. Remove the nylon tie straps located from both ends of the sunroof control module (2).




3. Release the control module retainers from the metal bracket by sliding the control module toward the left side of the vehicle.




4. Remove the control module from the sunroof module.
5. Disconnect the electrical connectors from the control module.
6. Remove the control module from the vehicle.

INSTALLATION PROCEDURE




1. Position the control module to the sunroof module.
2. Connect the electrical connectors to the ends of the control module.




3. Install the control module to the sunroof module by sliding it to the right to engage the retainers.




4. Install the nylon tie straps at both ends of the control module (2).
5. Inspect the operation of the sunroof module.
6. Install the headliner.