Seat Back Frame Replacement - Front
SEAT BACK FRAME REPLACEMENT - FRONTREMOVAL PROCEDURE
1. Remove the front seat.
2. Remove the seat trim panel.
3. Remove the seat cushion trim and pad.
4. Remove the 4 seat pan bolts.
5. Remove the seat pan
6. Remove the bolts that secure the seat back frame to the adjuster.
7. Remove the seat back frame from the adjuster.
8. Remove the seat back pad.
9. If equipped, remove the lumbar clips from the seat frame. Remove the lumbar from the seat frame.
INSTALLATION PROCEDURE
1. If equipped, position the lumbar on the seat frame. Install the lumbar clips to the seat frame.
2. Install the seat back pad.
3. Install the seat back frame to the seat adjuster.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the bolts that secure the frame to the adjuster,
Tighten
Tighten the bolts to 24 N.m (18 lb.ft).
5. Install the seat pan bolts.
Tighten
Tighten the bolts to 24 N.m (18 lb.ft).
6. Install the seat cushion trim and pad.
7. Install the seat trim panel.
8. Install the front seat.