Disc Brake Backing Plate Replacement

Disc Brake Backing Plate Replacement- Rear

Removal Procedure







1. Remove the wheel bearing/hub (3). Refer to Wheel Bearing/Hub Replacement - Rear

Important: The backing plate (2) is attached to the knuckle (1) through the wheel bearing hub bolts (4).

2. Remove the backing plate (2) from the knuckle (1).

Installation Procedure







1. Install the backing plate (2) to the knuckle (1).
2. Install the wheel bearing/hub (3). Refer to Wheel Bearing/Hub Replacement - Rear