Single

Removal Procedure

Important: The muffler is serviced as a complete assembly and cannot be serviced separately.





1. Raise and support the vehicle.
2. Support the exhaust system.
3. Remove the catalytic converter nuts.





4. Remove the exhaust system from the exhaust hangers.
5. Clean the catalytic converter and the muffler gasket mating surfaces.


Installation Procedure





1. Install the muffler to the exhaust hangers.
2. Support the exhaust system.





3. Install a new gasket to the catalytic converter and the muffler.

Notice: Refer to Fastener Notice in Service Precautions

4. Install the catalytic converter nuts.
^ Tighten the nuts to 60 Nm (44 ft. lbs.).
5. Remove the exhaust system support.
6. Lower the vehicle.
7. Inspect for exhaust leaks.