Accelerator Pedal: Service and Repair
ACCELERATOR CONTROLS PEDAL REPLACEMENTREMOVAL PROCEDURE
1. Remove the left instrument panel sound insulator.
2. Disconnect accelerator pedal electrical connector.
3. Remove the accelerated pedal bolts (2).
4. Remove the accelerator pedal (1) from the vehicle.
INSTALLATION PROCEDURE
1. Position the accelerator pedal (1) to the vehicle.
NOTE: Refer to Fastener Note in Service Precautions.
2. Install the accelerator pedal bolts (2).
Tighten
Tighten the bolts to 5 N.m (44 lb in).
3. Connect accelerator pedal electrical connector.
4. Install the left instrument panel sound insulator.