Shoulder Belt Guide Adjuster Replacement - Front
SHOULDER BELT GUIDE ADJUSTER REPLACEMENT - FRONTREMOVAL PROCEDURE
1. Remove the upper quarter trim panel.
2. Remove the shoulder belt guide adjuster bracket bolts.
3. Remove the shoulder belt guide belt adjuster bracket from the upper center pillar.
INSTALLATION PROCEDURE
IMPORTANT: Verify that the release lever at the top of the bracket is in the full up position.
1. Position shoulder belt guide adjuster bracket to the upper center pillar.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the shoulder belt guide belt adjuster bracket bolts.
Tighten
Tighten the shoulder belt guide adjuster bracket bolts to 42 N.m (31 lb ft).
3. Install the upper quarter trim panel.