Seat Back Panel Replacement - Front
SEAT BACK PANEL REPLACEMENT - FRONTREMOVAL PROCEDURE
1. Remove the cargo net.
2. Remove the panel screws.
3. Pull the panel bottom out to disengage the locator tab(1).
4. Slide the panel up to disengage the retainer clip.
5. Remove the cable guides from the handle back
6. Lift the handle and remove the cable anchors.
7. Remove the handle and trim panel from the seat.
INSTALLATION PROCEDURE
1. Position the handle on the panel and install the cable anchors.
2. Install the cable guides and the handle.
3. Engage the retainer at the top of the panel.
4. Engage the locator tab (1) in the seat back
NOTE: Refer to Fastener Notice in Service Precautions.
5. Install the screws that secures the seat back trim panel.
Tighten
Tighten the screws to 3 N.m (27 lb.in).
6. Install the cargo net.