ABS Indicator Inoperative

ABS Indicator Inoperative

ABS Indicator Inoperable Step 1 - 7:

Circuit Description
The Instrument Panel Cluster (IPC) turns the ABS Indicator on during the IPC bulb check for approximately 3 seconds when the ignition switch is turned to the ON position. If the EBCM sets a Diagnostic Trouble Code (DTC) the EBCM sends the IPC the command to turn the ABS indicator on.

Test Description
The numbers refer to step numbers on the diagnostic table.
2. Checks if the IPC has the ability to turn the ABS Indicator on.