Instrument Panel Cluster (IPC) - Bezel Replacement

Bezel Replacement - Instrument Panel (I/P) Cluster

Removal Procedure





1. Pull the instrument panel (I/P) compartment access hole cover from the side of the I/P.
2. Pull the I/P accessory trim plate rearward slightly for access to the steering column filler. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (Instrument Panel (IP) - Accessory Trim Plate Replacement) .
3. Remove the I/P steering column opening filler assembly. Refer to Steering Column Filler Replacement (Steering Column Filler Replacement) .




4. Remove the I/P cluster trim bezel assembly screw.




5. Remove the I/P cluster trim bezel assembly.



Installation Procedure





1. Align the I/P cluster trim bezel assembly to the I/P.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the I/P cluster trim bezel assembly screw.

Tighten the screw to 2 N.m (18 lb in).





3. Install the I/P steering column opening filler assembly. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster (Instrument Panel Cluster (IPC) - Trim Panel Replacement) .
4. Install the I/P accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory (Instrument Panel (IP) - Accessory Trim Plate Replacement) .
5. Install the I/P compartment access hole cover to the I/P.