Compressor Hose Assembly Replacement
COMPRESSOR HOSE ASSEMBLY REPLACEMENTTOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the air cleaner assembly.
3. Remove the A/C compressor hose nut from the condenser.
4. Disconnect the A/C compressor hose from the condenser.
5. Remove the A/C compressor hose nut from the compressor hose block to the evaporator tube.
6. Remove the A/C compressor hose from the evaporator tube.
7. Remove the A/C compressor hose nut from the A/C compressor.
8. Remove the A/C compressor hose from the A/C compressor.
9. Remove and discard all sealing washers.
INSTALLATION PROCEDURE
1. Install new sealing washers onto the A/C compressor hose assembly.
2. Install the A/C compressor hose to the A/C compressor.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the A/C compressor hose nut to the A/C compressor.
Tighten
Tighten the nut to 27 N.m (20 lb ft).
4. Install new seals washers to the A/C compressor hose assembly and evaporator tube.
5. Install the A/C compressor hose to the evaporator tube.
6. Install the A/C compressor hose to evaporator tube nut.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
7. Install the A/C compressor hose to the condenser.
8. Install the A/C compressor hose nut to the condenser.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
9. Install the air cleaner assembly.
10. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
11. Leak test the fittings of the component using J 39400-A.