Tire Monitoring System: Service and Repair
Tire Pressure Monitor Reset ProcedureImportant: After resetting, the TPM system requires up to 8 km/h (5 miles) of flat, smooth road straight line driving in each of the 4 speed ranges to complete the calibration process. If the TPM system does not reset, refer to Driver Information Center (DIC) Switches Inoperative.
Using the Driver Information Center (DIC)
1. Set all tire pressures to the recommended kPa/psi, refer to Tire Inflation Pressure Specifications.
2. Turn ON the ignition, with the engine OFF.
3. Press the vehicle information button until TIRE INFLATION MONITOR SYSTEM PRESS (down/left arrow) SWITCH TO RESET is displayed.
4. Press and hold the down/left arrow button until TIRE INFLATION MONITOR SYSTEM HAS BEEN RESET is displayed.
5. Release the down/left arrow button and TIRE PRESSURE NORMAL is displayed.