Parking Brake Warning Switch: Service and Repair

Park Brake Warning Lamp Switch Replacement

Removal Procedure





1. Remove the left side instrument panel insulator.
2. Remove the left carpet retainers. Refer to Carpet Retainer Replacement - Front.
3. Disconnect the electrical connector from the switch.
4. Remove the mounting screw.
5. Remove the parking brake indicator switch (1).

Installation Procedure





1. Install the parking brake indicator switch (1).

Notice: Refer to Fastener Notice in Service Precautions.
Fastener Notice


2. Install the mounting screw.
* Tighten the mounting screw to 3 Nm (26 inch lbs.).
3. Connect the electrical connector to the switch. Check the operation of the switch.
4. Install the left carpet retainers. Refer to Carpet Retainer Replacement - Front.
5. Install the left side instrument panel insulator.