Power Window Motor: Service and Repair

Motor Replacement - Power Mirror

Removal Procedure





1. Remove the mirror face. Refer to Mirror Face Replacement (Mirror Face Replacement) .
2. Remove the screws from the mirror motor.




3. Disconnect the electrical connectors from the rear of the mirror motor.
Note the position of the plugs on the mirror motor when removing.
4. Remove the motor .



Installation Procedure





1. Position the motor to the mirror housing.
2. Connect the electrical connector to the rear of the mirror motor.





Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the screws to the mirror motor.

Tighten the screws to 2 N.m (18 lb in).

4. Install the mirror face to the mirror housing. Refer to Mirror Face Replacement (Mirror Face Replacement) .
5. Inspect the mirror for proper operation.