Instrument Panel (IP) - Outer Trim Cover Replacement

Instrument Panel Outer Trim Cover Replacement (Pontiac)

Removal Procedure




1. Remove the screw (2) from the outer trim cover (1).
2. Remove the outer trim cover (1) from the instrument panel (I/P) carrier.

Installation Procedure




1. Position the outer trim cover (1) to the I/P carrier.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the screw (2) to the outer trim cover (1).

Tighten the screw to 2 N.m (18 lb in).