Seat Cushion Frame Replacement - Front
SEAT CUSHION FRAME REPLACEMENT - FRONTREMOVAL PROCEDURE
1. Disable the SIR system, if equipped with Side Impact Air Bag (SIAB).
CAUTION: When performing service on or near the SIR components or the SIR wiring, the SIR system must be disabled. Refer to SIR Disabling and Enabling Zones. Failure to observe the correct procedure could cause deployment of the SIR components, personal injury, or unnecessary SIR system repairs.
2. Remove the seat cushion from the seat back.
3. Remove the seat adjusters from the seat frame.
4. On the driver side, remove the seat belt buckle bolt.
Remove the seat belt buckle (6) from the cushion frame (1).
5. Unfasten the J-hook retainers (3) from the seat cushion frame (1).
6. Remove the seat cushion cover (2) from the seat cushion frame (1).
INSTALLATION PROCEDURE
1. Install the seat cushion cover (2) to the seat cushion frame (1).
2. Fasten the J-hook retainers (3) to the seat cushion frame (1).
3. On the driver side install the seat belt buckle (6) to the cushion frame (1).
4. Install the seat belt buckle bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt to 20 N.m (15 lb ft).
5. Install the seat adjusters to the seat frame.
6. Install the seat cushion to the seat back.
7. Enable the SIR system, if equipped with SIAB.