Dome Lamp Replacement (Without RPO Code C95)

DOME LAMP REPLACEMENT (WITHOUT RPO CODE C95)

REMOVAL PROCEDURE




1. From the rear of the dome lamp lens, insert a flat-bladed tool (1) between the dome lamp lens and the headliner (2).
2. Use the flat bladed tool in order to push the tab at the rear of the dome lamp lens forward. Disengage the tab from the headliner.
3. Pull the dome lamp lens (1) rearward in order to disengage the 2 tabs at the front of the headliner.

INSTALLATION PROCEDURE




1. Insert the 2 forward tabs on the dome lamp lens into the appropriate holes in the headliner.
2. Push at the rear of the dome lamp lens until the rear tab is fully seated in the headliner.