Rear Side Door Stationary Window Replacement

Rear Side Door Stationary Window Replacement

Removal Procedure

1. Lower the rear door window.
2. Remove the rear door trim panel.
3. Remove the rear door water deflector.
4. Remove the outer sealing strip.
5. Remove the bolts with secure the regulator to the rear door window.
6. Separate the window from the regulator and lower the window.




7. Remove the lower bolt from the stationary window (2).
8. Remove the stationary window screws (3).
9. Roll the stationary window forward and remove the stationary window with the run channel weather-strip from the door.

Installation Procedure




1. Position the stationary window with the run channel weather-strip in the door.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the stationary window channel bolt (2).

Tighten the stationary window channel bolt to 10 N.m (89 lb in).

3. Install the stationary window screws (3).

Tighten the stationary window screws to 3 N.m (27 lb in).

4. Attach the rear door window to the regulator.
5. Install the bolts which secure the rear door window to the regulator.
6. Install the outer sealing strip.
7. Install the rear door water deflector.
8. Install the rear door trim panel.