Trunk / Liftgate Hinge: Service and Repair

Hinge Replacement - Lift Gate

Removal Procedure

1. Remove the liftgate. Refer to Lift Gate Replacement (Service and Repair) .
2. Remove the headliner. Refer to Headliner Replacement (Service and Repair) in Interior Trim.




3. Use a grease pencil to mark the liftgate hinge position to the body.
4. Remove the hinge retaining nuts from the vehicle roof.
5. Remove the hinge from the vehicle.



Installation Procedure





1. Align the hinge with the marks made on the vehicle body.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the hinge retaining nuts.

Tighten the liftgate hinge stud nuts to 19.5 N.m (14 lb ft).

3. Install the headliner. Refer to Headliner Replacement (Service and Repair) in Interior Trim.
4. Install the liftgate. Refer to Lift Gate Replacement (Service and Repair) .