Seat Back Cover and Pad Replacement - Front
SEAT BACK COVER AND PAD REPLACEMENT - FRONTREMOVAL PROCEDURE
1. Remove the front seat assembly.
2. Remove the front seat back assembly.
3. Remove the head restraint (1) from the seat back cushion (3).
4. Gently pry the head restraint guides (1) from the seat back cushion (2) using a flat-bladed tool.
5. Remove the seat back trim panel, if necessary.
6. Cut and remove the hog rings.
7. Roll the seat back cushion cover (1) upward slowly and evenly.
8. Remove the seat back cushion pad (2) from the frame (3), if necessary.
INSTALLATION PROCEDURE
1. Install the seat back cushion pad (2) to the frame (3), if removed.
2. Roll the seat back cushion cover (1) down over the seat back cushion (2).
3. Use hog ring pliers to install new hog rings. Ensure that the seat back cushion cover (1) is secure.
4. Install seat back trim panel, if removed.
5. Install the head restraint guides (2) to the seat back cushion (3).
6. Install the head restraint (1) to the seat back cushion (3).
7. Install the front seat back assembly.
8. Install the front seat assembly.