Rear Suspension

Wheel Bearing/Hub Replacement Rear (AWD)

Removal Procedure
1. Remove the rear knuckle.







2. Remove the dust deflector (2).







3. Remove the 4 bolts (2, 3, 4, 5).
4. Remove the wheel bearing and hub assembly.



Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.
Fastener Notice







1. Install the wheel bearing and hub assembly and the 4 bolts (2, 3, 4, 5).
Tighten the bolts to 56 Nm (41.3 ft. lbs.).

2. Use a hydraulic press in order to install a NEW dust deflector.
3. Install the rear knuckle.