Fuel Tank Vent: Service and Repair
FILL LIMITER VENT VALVE REPLACEMENTREMOVAL PROCEDURE
1. Remove the fuel tank.
2. Remove the three bolts (2) and the FLVV cover (1) from the fuel tank.
3. Disconnect the two EVAP lines from the FLVV.
4. Remove the three bolts (2) and the FLVV (1) and gasket (3) from the fuel tank.
INSTALLATION PROCEDURE
1. Install the FLVV (1) and the gasket (2) into the fuel tank.
NOTE: Refer to Component Fastener Tightening Notice in Service Precautions.
2. Secure the FLVV (1) to the fuel tank with the three bolts (2).
Tighten
Tighten the bolts to 6 N.m (53 lb in).
3. install the FLVV cover (1) onto the FLVV and secure with the three bolts (2).
Tighten
Tighten the bolts to 6 N.m (53 lb in).
4. Install the fuel tank.