Inflatable Restraint Side Impact Module Replacement - RH
INFLATABLE RESTRAINT SIDE IMPACT MODULE REPLACEMENT - RHREMOVAL PROCEDURE
1. Disable the SIR system.
2. Remove the front seat back cover.
3. Disconnect the electrical connector (3) from the side impact module.
4. Remove the side impact module fasteners (1).
5. Remove the side impact module (2).
6. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period.
INSTALLATION PROCEDURE
1. Install the side impact module (2).
2. Install the side impact module fasteners (1).
3. Connect the electrical connector (3) to the side impact module.
4. Install the front seat back cover.
5. Enable the SIR system.