Seat Belt Retractor Replacement - Center Rear
SEAT BELT RETRACTOR REPLACEMENT - CENTER REARREMOVAL PROCEDURE
1. Remove the right rear seat cushion lower bolts.
2. Remove the rear seat belt retractor lower anchor bolt (5).
3. Remove the right rear seat back panel.
4. Remove the seat belt guide (1).
5. Pull seat belt lower anchor through rear seat back.
6. Remove the following components from the vehicle:
- The mounting bolt (3)
- The rear seat center belt retractor (2)
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the rear seat center belt retractor (2) to the seat back. Secure the retractor with the mounting bolt (3).
Tighten
Tighten the rear seat belt retractor mounting bolt to 42 N.m (31 lb ft).
2. Install seat belt lower anchor through seat back.
3. Install the rear seat belt retractor lower anchor bolt (5).
Tighten
Tighten the rear seat belt retractor lower anchor bolt to 42 N.m (31 lb ft).
4. Install seat belt guide (1).
5. Install right rear seat back cover.
6. Install the right rear seat cushion lower bolts.