Seat Belt Retractor Replacement - Left Rear
SEAT BELT RETRACTOR REPLACEMENT - LEFT REARREMOVAL PROCEDURE
1. Remove the left rear seat.
2. Remove the left rear seat hinge.
3. Remove the left rear door sill trim.
4. Remove the left rear seat garnish trim.
5. Remove the rear storage compartment.
6. Remove the rear compartment access panel.
7. Remove tool storage access panel.
8. Remove tool storage tray.
9. Remove child tether upper anchor brackets.
10. Remove the left lower quarter trim panel.
11. Remove the left shoulder adjuster bolt cover (1).
12. Remove the left shoulder adjuster bolt (8).
13. Remove the left shoulder adjuster (7).
14. Remove the lower anchor bolt (5).
15. Remove the upper retractor bolt (3).
16. Remove the lower retractor bolt (4).
17. Remove the retractor assembly (2).
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the rear seat belt retractor (2) to the vehicle. Secure the retractor with the upper mounting bolt (3) and the lower mounting bolt (4).
Tighten
- Tighten the rear seat belt retractor upper mounting bolt to 51 N.m (44 lb ft).
- Tighten the lower mounting bolt to 41 N.m (30 lb ft).
2. Install the rear seat belt retractor lower anchor bolt (5).
Tighten
Tighten the rear seat belt retractor lower anchor bolt to 41 N.m (30 lb ft).
3. Install the left shoulder adjuster (7) with the bolt (8).
Tighten
Tighten the left shoulder adjuster bolt to 42 N.m (31 lb ft).
4. Install the left shoulder adjuster bolt cover (1).
5. Install the left lower quarter trim panel.
6. Install the child tether upper anchor brackets.
7. Install the tool storage compartment tray.
8. Install the tool storage access panel.
9. Install the rear compartment access panel.
10. Install the rear storage compartment.
11. Install the left seat garnish trim.
12. Install the left rear door sill trim.
13. Install the left rear seat hinge.
14. Install the left rear seat.