9. Countershaft Removal

Countershaft Removal

Tools Required
^ J37271 Countershaft Locknut Spanner Wrench
^ J8614-01 Countershaft Driven Gear Holder
^ J34826 Hub Nut Socket





1. Unstake the countershaft driven gear locknut.
2. Install the J8614-01 onto the countershaft driven gear (1) to hold the countershaft driven gear stationary during removal of the countershaft lock nut.





3. Use the J34826 with a J8614-01 to remove the countershaft driven gear (1) locknut from the countershaft.





4. Unstake the front countershaft locknut (2).





5. Use a J37271 with a J8614-01 in order to remove the front countershaft locknut from the countershaft assembly (1).





6. Use the J8614-01 in order to remove the countershaft driven gear (2) from the countershaft.
7. Remove the J8614-01 from the countershaft driven gear.





8. Remove the countershaft driven gear thrust bearing (2) from the transaxle case (1).





9. Remove the countershaft assembly (1) from the underdrive clutch assembly (2).





10. Remove the underdrive sun gear (1) from the underdrive clutch drum (2).





11. Remove the underdrive sun gear inner thrust bearing (3) from the underdrive clutch drum (1).