8. First Reverse Brake Piston Removal
First Reverse Brake Piston RemovalTools Required
^ J23327 Clutch Spring Compressor
^ J35683 First and Reverse Brake Piston Compressor
1. Install the J23327 with a J35683 and compress the 1st-reverse brake piston return spring until the 1st-reverse brake piston return spring snap ring (2) can be removed.
2. Remove the 1st-reverse brake piston return spring snap ring (1) from the transaxle case.
3. Remove the J23327 and the J35683 from the transaxle case.
4. Remove the 1st-reverse brake piston return spring (1) from the transaxle case.
Caution: Refer to Safety Glasses in Service Precautions.
Important: When using compressed air to remove components, air pressure should not exceed 98 kPa (14 psi).
5. Remove the 1st-reverse brake piston (1) from the transaxle case by slowly applying low pressure compressed air into the fluid passage (2).
6. Remove the 1st-reverse brake assembly. Refer to First Reverse Brake Assembly Replacement.