Radio Setup

RADIO SETUP

For the DE 100 or DE 153 series radio, complete the following procedure, using a scan tool, in order to properly set up communication:
1. At the Main Menu screen, select: Diagnostics.
2. At the Vehicle Identification screen, select the following options:
- Model Year
- Passenger Car
3. At the System Selection Menu screen, select: Body.
4. At the Vehicle Identification screen, select the Platform type.
5. At the Body screen, select: Radio.
6. At the Radio screen, select: Special Functions.
7. At the Special Functions screen, select: Radio Setup.
8. At the Radio Setup screen, press ENTER. The following test will set up a new or existing radio.
9. Select the appropriate Regular Production Options (RPO) using the arrow keys and press ENTER.
- U1C
- U1P
- U1Q
- U1P and U85
- U1Q and U85
10. Verify that the scan tool displays "Is vehicle equipped with U2L (L Band)? Press YES or NO" and press YES or NO.
11. Verify that the scan tool displays "Test in Progress."
12. Verify that the scan tool displays "Test Completed Successfully."
13. Press EXIT on the scan tool.

IMPORTANT: The radio set up will configure the following systems:
- LEARN VIN
- Diagnostic Trouble Codes
- Class 2 Radio Messages
- Country Code
- Chime Volume
- Chime Level
- 12/24 Hour Clock

Without learning the VIN, the radio will display a locked message (LOC).

The radio setup procedure will also clear the following messages:
- CAL
- CAL ERR
- CALIBRATE

14. Cycle the ignition. Setup is complete.