Seat Back Center Pivot Replacement - Rear Folding
SEAT BACK CENTER PIVOT REPLACEMENT - REAR FOLDINGREMOVAL PROCEDURE
1. Remove the rear seat back cushion.
2. Remove the following components from the vehicle:
- The 2 bolts (2) that retain the rear seat back cushion center pivot support (1)
- The rear seat back cushion center pivot support (1)
INSTALLATION PROCEDURE
1. Install the rear seat back cushion center pivot support (1) to the vehicle. Secure the support with the 2 bolts (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the center pivot support bolts to 18 N.m (13 lb in).
2. Install the rear seat back cushion.