Oil Pick Up/Strainer: Service and Repair

Oil Pump Pipe and Screen Assembly Replacement

Removal Procedure





1. Remove the oil pan.
2. Remove the oil pump pipe screen bolts.
3. Remove the oil pump screen.
4. Remove the gasket.
5. Use solvent in order to clean the screen and the housing. Blow dry the screen and the housing.
6. Clean the gasket mating surfaces.

Installation Procedure





1. Install the oil pump screen gasket.
2. Install the oil pump screen.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the oil pump screen bolts.
^ Tighten the oil pump screen bolts to 15 Nm (11 ft. lbs.).
4. Install the oil pan.