28. Crankshaft Rear Oil Seal and Housing Removal - First Design

Crankshaft Rear Oil Seal and Housing Removal





1. Remove the crankshaft rear oil seal housing bolts.
2. Remove the crankshaft rear oil seal housing and gasket.

Important: Notice the direction of the rear oil seal. The new design seal is a reverse style as opposed to what has been used in the past.





3. Place the crankshaft rear oil seal housing face down on a clean surface and support with blocks of wood.
4. Use a suitable driving tool and hammer and lightly tap around the outer edge of the seal to remove it.