Air Cleaner Fresh Air Duct/Hose: Service and Repair

AIR CLEANER INTAKE DUCT REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the electrical connector (2) from the intake air temperature (IAT) sensor (1).




2. Loosen the intake duct clamps.
3. Remove the intake duct from the air cleaner and rotate the duct upwards.
4. Remove the intake duct by pulling upwards and inboard.

INSTALLATION PROCEDURE




1. Install the intake duct on the throttle body.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Rotate the intake duct down and install the intake air duct onto the air cleaner.

Tighten the intake duct clamp to 2 N.m (18 lb in).




3. Connect the electrical connector (2) to the intake air temperature (IAT) sensor (1).