Operation CHARM: Car repair manuals for everyone.
Home >> Pontiac >> 2005 >> Bonneville V6-3.8L VIN K >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Actuators and Solenoids - Transmission and Drivetrain >> Actuators and Solenoids - A/T >> Pressure Regulating Solenoid >> Service and Repair

Pressure Regulating Solenoid: Service and Repair



Pressure Control Solenoid (PCS) Replacement
Removal Procedure
1. Remove the case side cover.
2. Disconnect the transaxle wiring harness.





3. Using a small screwdriver or pick, remove the pressure control solenoid valve retainer (314E) from the control valve body (301).
4. Remove the pressure control solenoid (322).
5. Remove the O-ring seals (307, 316) from the PC solenoid valve (322) ONLY if they are damaged.

Installation Procedure





1. Install new O-ring seals (307, 316) onto the Pressure Control (PC) solenoid valve (322), if they had been removed.
2. Install the pressure control solenoid (322).
3. Hold the PC solenoid valve (322) in the control valve body (301). Install the pressure control solenoid valve retainer (314E) into the control valve body (301).
4. Connect the transaxle wiring harness.
5. Install the case side cover.
pro multis · About Operation CHARM