Trim Panel Replacement - Rear Window Shelf

Trim Panel Replacement - Rear Window Shelf

Removal Procedure

1. Disable the roof rail SIR system. Refer to SIR Disabling and Enabling Zone 8 in Restraint Systems.
2. Remove the upper rear garnish molding.
3. Remove the seat belt anchors from the floor.




4. Remove the shelf trim panel retainers.
5. Remove the shelf trim panel.

Installation Procedure




1. Feed the seat belts through the openings in the shelf trim panel.
2. Install the shelf trim panel.




3. Install the shelf trim panel retainers.
4. Install the seat belt anchors.
5. Install the upper rear garnish molding.
6. Enable the roof rail SIR system. Refer to SIR Disabling and Enabling Zone 8 in Restraint Systems.

The headliner panel is a one-piece polyurethane/fiberglass substrate panel covered with a foam cloth facing. The substrate does not allow for replacement of the cloth facing. Service the formed headliner panel as a complete unit.

The headliner panel is held in place with the following components:
- Magnet
- Plastic push retainers at the rear of the headliner
- Sunshade retainers
- Coat hooks
- Upper trim panels
- Door Opening Weatherstrips