Brake Pedal Adjustment Position Sensor Replacement

BRAKE PEDAL ADJUSTMENT POSITION SENSOR REPLACEMENT

REMOVAL PROCEDURE
1. Remove the closeout panel.
2. Remove the steering wheel stub shaft bolt and position the steering wheel stub shaft away from the steering column in order to gain access to the brake pedal adjustment position sensor.




3. Remove the electrical connector from the brake pedal adjustment position sensor.
4. Remove the brake pedal adjustment position sensor.

INSTALLATION PROCEDURE




1. Install the brake pedal adjustment position sensor to the brake pedal bracket. Ensure the brake pedal position sensor tabs (1) lock into the brake pedal bracket and the sensors arm (2) is correctly installed.

IMPORTANT: Ensure that the brake pedal adjustment position sensor is installed correctly to the bracket. The brake pedal adjustment position sensor has a sensing arm that must be installed as shown in the picture to insure it is sensing brake pedal position.

2. Install the electrical connector to the brake pedal adjustment position sensor.
3. Install the steering wheel stub shaft to the steering column.
4. Install the closeout panel.