Instrument Panel (IP) - Center Support Bracket Replacement

Bracket Replacement - Instrument Panel (I/P) Center Support

Removal Procedure




1. Remove the body control module.
2. Remove the center console.
3. Remove the instrument panel (I/P) center support bracket bolts.
4. Remove the I/P center support bracket.

Installation Procedure




1. Install the I/P center support bracket.

Notice: Refer to Fastener Notice in service Precautions.

2. Install the I/P center support bracket bolts.

Tighten the bolts to 10 N.m (89 lb in).

3. Install the body control module.
4. Install the center console.