Fog/Driving Lamp: Service and Repair

FOG LAMP REPLACEMENT - FRONT

REMOVAL PROCEDURE




1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the electrical connector from the front fog lamp assembly.
3. Remove the fog lamp bulb from the lamp housing.
4. Remove the fog lamp assembly from the lower grille, turning the outer lock ring counterclockwise.
5. Remove fog lamp assembly from the fascia.

INSTALLATION PROCEDURE
1. Install fog lamp assembly to the fascia.




2. Install the fog lamp assembly to the lower front grille, turning the outer lock ring clockwise.
3. Install the fog lamp bulb to the lamp housing.
4. Connect the electrical connector to the fog lamp assembly.
5. Lower the vehicle. Refer to Vehicle Lifting.
6. Inspect the fog lamp alignment. Adjust the alignment if necessary.