Steering/Suspension - Revised Camber Specifications

SMU - Revised Front Camber and Front Camber Cross Tolerance Specifications # 05-03-07-002 - (Mar 21, 2005)

Revised Front Camber and Front Camber Cross Tolerance Specifications

Models:
2005 Pontiac G6

This bulletin is being issued to revise the front camber and front camber cross tolerance specifications in the Wheel Alignment sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.

The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.





Warranty Information





Disclaimer