Rear Camber Adjustment

Rear Camber Adjustment





1. Loosen the inner lower control arm cam bolt nuts.
2. Rotate the cam bolts to the required camber specification setting.

3. Notice: Refer to Fastener Notice in Service Precautions.

Maintain the camber setting while tightening the cam bolt nuts.
^ Tighten the inner lower control arm (front) bolt nut to 110 Nm (81 ft. lbs.).

4. Important: Check the toe setting AFTER changing camber or caster.

Check the camber setting after tightening.
5. Adjust the camber setting if necessary.